Filter
Top Products
40
1 Follow Step 1-2 under “Manual setting”.
2 In [Date and time], go to [Time format]
or [Date format] to select options.
Network settings
Setup network
how NP3900 connectsto home Wi-Fi/wired
network:
Switch between different connection
methods (wireless or wired,
automatic or manual);
Switch between different routers.
To do so, do the following:
1 From Home screen, go to [Settings] >
[Network settings] > [Setup network].
Or, press SETTINGS on the remote
control to enter [Settings].
2 Connect NP3900 as you did in the
>’Connect to home Wi-Fi/wired
network’).
Device name
In [Device name], you can name/rename your
NP3900. On a connected UPnP server/client,
the NP3900 can be found as named.
1 From Home screen, go to [Settings] >
[Network settings] > [Device name].
2 In [Device name], press / to select
the entry location; press
/ repeatedly
to select desired letters.
Tip
According to the location and time zone you
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
To check and change current location and time
zone, go to [Settings] > [Location and time
zone].
Manual setting
1 Turn on the unit, if necessary.
2 From Home screen, select [Settings] >
[Clock settings] >[Date and time].
Or, press SETTINGSon the remote
control to enter [Settings].
3 In [Date and time], select [Current date
and time] > [Manual].
4 To enter date and time,
Press
or to select the entry
location;
Use the alphanumeric buttons to
enter desired digits;
Press OK
You can also press
or
repeatedly, or press and hold
or
until the desired digit appears.
Set date/time format
Select how date and time are displayed in the
clock.
1/3
Automatic (Internet)
Manual
EN