Filter
Top Products
39
2 Select an option. Press OK to turn it on.
Tip
You can also press SLEEP on the remote
control repeatedly to set the time duration.
Date and time
The date and time can be set automatically or
manually.
Tip
To view the set clock, press CLOCK on the
emote control.
Automatic setting
For automatic clock setting, use the online
service over the Internet.
Through the online service over the Internet
1 Turn on the unit, if necessary.
Ensure that the unit is connected to
the home Wi-Fi/wired network and
Internet.
2 From Home screen, select [Settings] >
[Clock settings] > [Date and time].
Or, press SETTINGS on the remote
control to enter [Settings].
3 In [Date and time], select [Current date
and time] > [Automatic (Internet)].
» The unit starts auto time setting over
the Internet.
» A message appears when the setting
is done.
Use the alarm
At the set alarm time, music/Internet radio
plays as desired, or the buzzer sounds.
Note
The alarm sounds even if you have switched
NP3900 to active standby or Eco standby.
The buzzer sounds instead, if NP3900 fails to
connect to a music library or an Internet radio
station.
NP3900 is unmuted if it has been muted.
The alarm sounds in a higher volume if the
volume level is lower than minimum.
To snooze the alarm
Press any button on the unit or the
remote control (except for the volume
buttons).
» The alarm sounds again 15 minutes
later. The alarm icon remains.
To stop the alarm
Press and hold
or .
Or press
/ALARM OFF on the
remote control.
» The alarm is stopped.
» The alarm sounds again next day.
To turn off the alarm
Go to [Settings] > [Clock settings] >
[Alarm]. Select [Alarm off] and press OK
on the remote control.
Sleep timer
With the sleep timer, you can have NP3900
turned off automatically after the set timer
duration.
To set the time duration
1 From the home screen, go to [Settings] >
[Clock settings] > [Sleep timer].
Or, press SETTINGS on the remote
control to enter [Settings].
EN