Filter
Top Products
41
English
3139 246 14134
Programming recordings
with VIDEO Plus+
®
System
With this programming system, you only
need to enter the VIDEO Plus+
®
programme number as all the information
needed by the DVD recorder for
programming is contained in the
programming number.
1 Turn on the TV power. Select the correct
Video In channel at the TV.
2 Press TIMER on the remote control.
➜The timer overview appears.
TIMER 11.55
TIMER OVERVIEW
TIMER DETAILS
10:55 CNBC Weekly
23:45 Disco 12.04
21:00 BBC2 Daily
06:00 HBO 16.04
08:00 ABC 13.04
Delete New Timer Change
Start time
Stop time
Date
Repeat
Channel
VPS
Record Mode
12:00
18:05 M
15:07:2004
Once
199 BBC24
DVD HQ
Off
VIDEOPlus+
3 Press the matching colour coded button
on the remote control to select
{ VIDEO Plus+ }.
➜The VIDEO Plus+ entry screen
appears.
TIMER MENU 12.55
VIDEO Plus+
Clear Store Cancel
4 Use the alphanumeric keypad 0-9 to
enter the PlusCode number.
(e.g.: 5-312-4 or 5,312 4, key in ‘53124’).
➜This number is up to 9 digits long and
can be found next to the start time of the
TV programme in your TV listings
magazine.
● To clear the VIDEO Plus+ entry, press the
matching colour coded button on the
remote control to select { Clear }.
● To cancel the VIDEO Plus+ programming,
press the matching colour coded button
on the remote control to select
{ Cancel }.
➜The timer overview appears.
5 Press OK to confirm, then press the
matching colour coded button on the
remote control to select { Store }.
➜The system will store the timer entry
and return to the timer overview screen.
● If the information is missing or not
available, you may be asked to enter more
information. Follow the instructions on
the TV.
● If you want to make changes, use
3 4 1 2 to select the appropriate entry
field. If required, make changes using 3 4
or the alphanumeric keypad 0-9.
6 To exit, press TIMER.
7 Insert a DVD+R(W).
8 Press STANDBY-ON to turn off the
DVD recorder.
➜The DVD recorder must be in standby
mode in order for the timer recording to
occur. If not, a warning message will
appear ten minutes before the recording
starts.
➜ If you ignore the warning message, the
DVD recorder will switch to standby
mode automatically before the
programmed recording begins.
➜The '
TIMER’ icon will light up on the
display panel if a timer recording is set.
Timer Recording (cont’d)
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
1DVDR6xx_Eng05_14134c 9/28/04, 11:20 AM41