Filter
Top Products
29
ENGLISH
¤
Search the desired end of the insert recording on
the cassette in the video recorder.
Press the r button. Use the s
button to select the counter mode.
Press the m button to reset the tape
counter to "0:00:00".
$
Search the desired beginning of the insert
recording on the cassette in the video recorder.
Press the r button.
%
Switch on the external video/audio source. Search
the beginning of the insert recording.
&
Press the l button.
Select the option "Record modes".
Confirm with the G button.
The OSD page "RECORD MODES" appears on the
picture screen.
If the picture/sound source is connected to the
input sockets © ('E3') or † ('E4') and
ª + º (audio input for "E3" and "E4"):
Use the slider controls {} to
adjust the recording level so that the "0 dB" mark
lights up during the loudest passages of the
recording.
If the picture/sound source is conected to the
t or u socket, the recording level
is adjusted automatically.
/
Select the desired insert function:
"Insert Dubbing" or "Insert Video" or
"Insert Copy".
Select the programme position for the connected
video/audio source ("E1", "E2", "E3" or "E4").
Follow the user guide on the OSD page.
(
Start the insert recording at the "correct" moment
with the g button.
)
The insert recording is automatically stopped
when the tape counter has reached "0:00:00".
<:
Press the l button or the d
button (remote control) to terminate the recording.
Note on "INSERT VIDEO":
* To start playback of the "original" sound, repeated-
ly press the p button on the remote control
until the video recorder's display indicates "MONO".
The insert functions
With the insert functions, it is possible to conveniently
insert other picture and/or sound recordings into
existing recordings.
Connect the video/audio source to the input sockets
© ("E3") or † ("E4") and ª + º
(
audio input
sockets for "E3" and "E4"
)
of the video recorder.
The sockets are located behind the flap at the front of
the recorder, or
connect the video/audio source to the Scart sockets
t or u of the video recorder. The
sockets are located on the back of the video recorder.
You have the choice between three insert functions.
• "INSERT DUBBING": the picture, the hifi sound (heli-
cal track), and the mono sound (longitudinal track)
are newly recorded.
• "INSERT VIDEO": the picture and the hifi sound
(helical track) are newly recorded, the mono sound
(longitudinal track) is maintained.
• "INSERT COPY": the picture is newly recorded.
The mono sound (longitudinal track) is retained and
transferred onto the hifi track (helical track).
Please also see the operating instructions of the
connected unit.
Insert the recorded cassette into the video recorder.
Make sure the cassette is not protected against
recording!
!
Switch on the TV set and select the programme
position intended for the video recorder.
"
Switch the video recorder on.