Filter
Top Products
6
Connecting to the aerial
Your video recorder could actually be referred to as a
"TV set without picture screen".
This is why you have to connect it to an aerial as well
as to a TV set. Only then you can make recordings and
play cassettes.
!
Remove the aerial cable plug from the TV set and
insert it into the 3 socket at the rear of the
video recorder.
"
Use the aerial cable supplied to connect the 4
socket on the video recorder with the aerial input
socket on your TV set.
Both the TV set and the video recorder are now
connected to the aerial.
2 EXTERNAL / DEC.- AV 2
1 EXTERNAL / EURO-AV 1
I
N
L
R
O
U
T
L
R
AUDIO
S-VHS OUT
RS 232
Inserting the batteries into
the remote control
!
Remove the battery holder from the back of the
remote control.
To do this, squeeze the holder at the lateral marks
(1.) and pull it off (2.).
"
nsert the batteries as indicated in the battery
holder.
¤
Close the battery holder by sliding it into the
remote control until you hear a "click"
Note:
* So that the battery operates correctly, it must
always be pointed at the TV set.