Filter
Top Products
44
Switching the built-in modulator
on and off
In the previous section, possible TV reception
interference was discussed. If picture/sound inter-
ference cannot be eliminated using the methods
mentioned, the built-in modulator can be switched off.
"Playback via the aerial cable" is no longer possible
when the modulator is switched off.
!
Press the buttons
V and G (Playback) on the
video recorder simultaneously.
"
Press the cursor button
_ for more than five
seconds. A message, e.g. "MODUL OFF", appears
in the video recorder display.
¤
Press the cursor button
_
again
for more than
five seconds.
A message, e.g. "MODULATOR", appears in the
video recorder display.
$
Store the setting by pressing the button B.
Note:
* If your TV set has the "Easy Link" function, and
the TV set and video recorder (scart socket
t) are connected with the special Scart
cable supplied, the modulator is automatically
switched off.
Remote control of TV sets
You remote control can operate with a number of
remote control codes for TV sets of different makes.
Using the appropriate code number and the TV key
group, you can adjust the volume, mute the TV sound,
select the programme positions, and switch the TV set
off.
E TV volume +/-
Q TV sound on/off
W TV off
R TV programme +/-
!
Direct the remote control at the TV set.
"
Press the W button and the numeric button
at the same time.
List of several makes:
Numeric button TV make
0 Philips, Radiola (F), Schneider (F)
1 Grundig
2 Panasonic
3 Panasonic
4 Sony
Note:
* For Panasonic, Sony, Radiola, and Schneider TV
sets, the correct function of the remote control can-
not be guaranteed for all types.
* If the selected code does not operate with your
TV set, or if the TV make is not contained in the list,
you can try out the codes one after the other.