Filter
Top Products
37
ENGLISH
8. ADDITIONAL FUNCTIONS OF YOUR VIDEO RECORDER
Personal preferences
For certain record and play functions, you can deter-
mine your individual settings in advance. You will find
detailed explanations of the functions in the various
chapters.
!
Switch on the TV set and select the channel number
for the video recorder.
"
Press the l button.
¤
Select the line "Personal preferences". Confirm this
by pressing the button _.
$
The OSD page "PERSONAL PREFERENCES"
appears on screen and the "Timer" line becomes
active.
%
You can now determine which type of TIMER pro-
gramming you prefer.
Select the display "No preference", "Standard Timer"
or "ShowView".
&
By pressing the button f or e, select the line
"Record speed". Select the display "SP" (= standard
playing time) or "LP" (= long playing time).
/
Select the line "OSD mode".
Select the desired display.
"auto": the selected mode is faded onto the
screen for a few seconds and then disappears.
"on": the selected mode is faded permanently on
screen.
"off": the selected mode is not faded onto the
screen.
(
Select the line "Direct Record". If the function is
switched on, the video recorder will always record
the TV channel selected (at the moment recording
begins). Select the function "off" or "on".
PERSONAL PREFERENCES
Timer No preference >
Record speed SP
OSD mode auto
Direct Record on
Record prepared E2
Automatic LP on
Confirm - OK
)
Select the line "Record prepared". (Externally
controlled TIMER recording.)
Select the display "E1" or "E2"
(recordings of
video/sound sources at the scart sockets
t or u, e.g. a second video
recorder, satellite receiver, Decoder etc.
)
.
<:
Store the entries by pressing the button K.
<>
Complete the setting by pressing the button
l.
Checking/setting time and date on
video recorder
In order to make programmed recordings, the video
recorder clock must first be set correctly.
If a TV channel with TXT is set on channel
number "01" of the video recorder, the time and date
will be loaded automatically (the time also for the ana-
logic clock).
If necessary, enter the time and date by hand.
!
Switch on the TV set and select the channel number
for the video recorder.
"
Press the button S on the video
recorder.
¤
Select the line "Clock". Confirm by pressing the
button _.
If the message: "Date and time loaded from P 01"
appears, continue the setting with Step
&
.
$
Select the appropriate input line. Enter the time,
year, month and date. Use digit buttons k to
do this.
%
Store by pressing the button K.
&
Confirm the setting by pressing the button
l.
CLOCK SETUP
Time 16:45
Year 1997
Month 05
Date 10
Date and time
loaded from P01
Confirm - OK