Filter
Top Products
12 Automatic Channel Programming
Programming Channels
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you reprogram channels. Make each entry within one minute of
the previous entry.
5
Wait for a few minutes while the VCR programs chan-
nels. When programming is complete, AUTO SET COMPLETED
will appear on-screen. Then, the programming of the lowest chan-
nel number placed in the VCR’s memory will appear on-screen.
Now when you press the CHANNEL Up/Down buttons, you will
scan only through channels you receive.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
6 SET REMOTE LOCATOR
TO END PUSH EXIT
TO SELECT PUSH NO. SHOWN
1 TV
2 CABLE TV (ON)
3 AUTO PROGRAMMING
4 ADD/DELETE CH
5 CH MEMORY REVIEW
6 TVSTEREO (ON)
7 SECOND AUDIO
TO END PUSH EXIT
1
Press the VCR button, then press the MENU button to
bring up the main menu display.
2
Press the Number 3 button to select TUNER SET UP.
3
Press the Number 1 button to select TV (if you have an
antenna) or the Number 2 button to select CABLE TV (if you
have a cable connection). (ON) will appear to the right of your
selection.
4
Press the Number 3 button to select AUTO PROGRAM-
MING. AUTO SET PROCEEDING/PLEASE WAIT and a scale that
shows the progress of programming will appear on-screen. The
VCR will place all the channels you receive into its memory.
...
...
POWER
CBL/DSS
VCR TV
EJECT MUTE
MENU
EXIT/STATUS
CLEAR
VCR PLUS+
/ENTER
LIGHT
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0
GO-TO
MEMORY
INDEX
VAR. SLOW
REMOTE LOCATOR
SKIP
VCR/TVSPEED
SEARCH
SLOW
TRACKING
STOP
REW FF
PLAY
VOL CHANNEL
/OTR
REC
1
5
2
3
4
• If the channel you select has no
broadcast, the screen will be solid
blue. The screen will remain blue
until you select an active channel.
• Line Input mode will always be
stored in the VCR’s memory as
channel 00. When you press
Number buttons 00, A/V IN will
appear on-screen and L will appear
on the display panel of the VCR.
Helpful Hints
Wait for the VCR to program
channels.