Filter
Top Products
52 Tape Counter Memory
5
When tape playback is stopped, press the REW(ind) but-
ton or the FF (Fast Forward) button to go to the location
on the tape at which the tape counter was reset to zero.
Press the PLAY button to watch the tape.
• You may only set the tape counter
to zero at one location at a time. If
you try to set a second tape counter
location to zero, the previous tape
counter to zero setting will be
erased.
• To erase the tape counter memory,
press the MEMORY button. The
Memory light will disappear from
the display panel.
• The tape counter memory does not
operate if SET REPEAT PLAY is
turned ON. Details are on page 54.
Helpful Hints
0 : 00 : 00
M 0 : 00: 00
Using the Tape Counter
Follow the steps below to reset the tape counter to zero at a
tape location you want to refer to later.
1
Play, fast forward or rewind a tape to the location that you would
like to refer to later. Press the STOP button to stop the
tape.
2
Press the EXIT/STATUS button. The status display, which
includes the tape counter, will appear on-screen.
3
While the tape counter is still on-screen, press the
CLEAR button to reset the tape counter to zero.
4
While the tape counter is still on-screen, press the MEM-
ORY button so that M appears beside the tape counter.
The Memory light will appear on the display panel.
...
...
POWER
CBL/DSS
VCR TV
EJECT MUTE
MENU
EXIT/STATUS
CLEAR
VCR PLUS+
/ENTER
LIGHT
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0
GO-TO
MEMORY
INDEX
VAR. SLOW
REMOTE LOCATOR
SKIP
VCR/TVSPEED
SEARCH
SLOW
TRACKING
STOP
REW FF
PLAY
VOL CHANNEL
/OTR
REC
1
2
5
3
4