Filter
Top Products
34 Timer Recording
Daily
Recording
Menu
Screen
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
6 SET REMOTE LOCATOR
TO END PUSH EXIT
TO SELECT PUSH NO. SHOWN
1 ONCE
2 DAILY
3 WEEKLY
4 PROGRAMREVIEW
TOEND PUSHEXIT
DAILYPROGRAM (MON-FRI)
PROGRAM - 12345678 -
SELECTPROGRAM NUMBER
TOEND PUSHEXIT
Follow the steps below to program your VCR to record TV pro-
grams while you’re away from home. You can program up to eight
timer recordings. For each one, the VCR will turn itself on,
record, and turn itself off automatically.
Before you begin make sure:
• Channels are programmed. Details are on page 12.
• The clock is set. Details are on pages 14 - 17.
• There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
• The VCR is in VCR position. The VCR light will appear on the
display panel of the VCR when the VCR is in VCR position. If
the VCR light does not appear, press the VCR/TV button once.
• When you use a Cable Box or DSS Receiver, timer recordings
are programmed differently. Please read the information on
pages eight - nine before proceeding.
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step 1.
1
Press the VCR button, then press the MENU button.
2
Press the Number 1 button to select PROGRAM.
3
Select a once, daily or weekly recording.
• Press the Number 1 button to select ONCE. The VCR will
record a TV program on any day you choose, up to 12 months
away.
• Press the Number 2 button to select DAILY. The VCR will
record a program every day from Monday through Friday, start-
ing at the same time and recording for the same length of time.
• Press the Number 3 button to select WEEKLY. The VCR will
record on the same day, at the same time, and for the same
length of time every week.
• To make corrections while you are
programming a timer recording,
press the CLEAR button until the cur-
sor is flashing on the item you want
to change. Enter the correct informa-
tion.
• Leave the Cable Box or DSS Receiver
on for a timer recording (if applica-
ble). See pages eight - nine for
details.
• Entries that do not match the VCR’s
internal calendar will cause a ques-
tion mark to appear on-screen (for
example, if you enter a Saturday
date for a DAILY recording). Enter
the correct information.
...
...
POWER
CBL/DSS
VCR TV
EJECT MUTE
MENU
EXIT/STATUS
CLEAR
VCR PLUS+
/ENTER
LIGHT
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0
GO-TO
MEMORY
INDEX
VAR. SLOW
REMOTE LOCATOR
SKIP
VCR/TVSPEED
SEARCH
SLOW
TRACKING
STOP
REW FF
PLAY
VOL CHANNEL
/OTR
REC
Helpful Hints
1
2
3