Filter
Top Products
Storing the adjusted audio
settings in memory
You can store the adjusted audio settings in
this unit for later recall.
1 Touch MEMORY.
2 Touch any of CUSTOM1, CUSTOM2 or
CUSTOM3 to store the adjusted setting.
3 Touch YES to store the current setting
into the selected sound setting.
# To cancelthe storage process, touch
CANCEL.
Editing the name of sound
settings
The name displayed for sound settings
(SETTING1, SETTING2 and SETTING3) can be
changed.
! Each name can be up to 10 characters
long.
1 Touch any of SETTING1, SETTING2 or
SETTING3 on the sound setting menu.
2 Touch NAME EDIT.
3 Touch the letter you wish to input.
Key What itdoes
Moves thecursor tothe previouscharac-
ter position.
Moves thecursor to the nextcharacter po-
sition.
Inputs the space.
ABC/123
Switches keypad betweenalphabet and
numeric.
Deletes letterby letter from theend of the
text.
4 Touch MEMORY to store the entered
name in memory.
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
You can use this function only when
STANDARD has been selected. (Refer to
Switching the DSP setting mode on page 117.)
The auto-time alignment is automatically ad-
justed for the distance between each speaker
and the listening position.
The auto-equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto-equalizer curve based
on that information.
WARNING
To preventaccidents, never carry out auto TA and
EQ while driving. Whenthis function measures
the car interior acousticcharacteristics to create
an auto-equalizer curve, a loud measurement
tone (noise) may beoutputted from the speakers.
CAUTION
! Carrying out auto TA and EQ underthe follow-
ing conditions may damagethe speakers. Be
sure to check theconditions thoroughly be-
fore carrying out auto TA and EQ.
— When speakersare incorrectly connected.
(e.g., When a rearspeaker is connected to
a subwoofer output.)
— When a speakeris connected to a power
amp delivering outputhigher than the
speaker’s maximum input powercapabil-
ity.
! If the microphone is placedin an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in a drainon battery power. Be sure
to place the microphonein the specified loca-
tion.
Audio Adjustments
En
106
Section
20