Filter
Top Products
Switching the XM channel
select mode
You have two methods for selecting a channel:
ChNumber mode and Category mode.
When selecting ChNumber mode, channels
in any category can be selected. Select
Category mode to narrow your search down
to only channels in a particular category.
% Touch MODE to select the desired chan-
nel select mode.
Touch MODE repeatedly to switch between
the two modes.
ChNumber (all channel select mode)—
Category (channel category select setting)
Switching between the
detail information display
and preset list display
You can switch the left side of the basic screen
according to your preference.
% Touch LIST.
Touch LIST repeatedly to switch between the
followings:
Detail information display—Preset list display
—OFF
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P1—P6 you can easily store up to six broad-
cast stations for later recall with the touch of a
key.
1 Select the channel that you want to
store in memory.
2 Touch LIST to display the preset list.
3 Touch and hold a preset tuning key
P1—P6 until the beep sounds.
The selected station has been stored in mem-
or y.
The next time you touch the same preset tun-
ing key P1—P6 the station is recalled from
memory.
Notes
! Up to 18 stations,six for each of three XM
bands can be storedin memory.
! You can also usea and b to recall stationsas-
signed to preset tuningkeys P1—P6 when the
ChNumber mode isselected.
Selecting a channel
Selecting a channel in the
channel category
1 Touch MODE to select the channel cate-
gory select mode.
Category appears on the information bar.
2 Touch a or b to select the desired chan-
nel category.
3 Touch c or d to select the desired
channel in the selected channel category.
Selecting a channel from the
XM channel list display
The list content can be switched so you can
search for the track you want to listen to not
only by the channel name but also by the artist
name or song title.
XM tuner (GEX-P920XM)
En
61
Section
13
XM tuner (GEX-P920XM)