Filter
Top Products
03
24
En
Erasing the additional
data from BD-ROMs
When a BD-ROM is played, additional data may be stored in the
player’s memory (local storage).
If the message indicating low memory (local storage) appears, erase
the BDMV data.
Caution
• When the BDMV data is erased, all the data of secondary video
(Picture-in-Picture), secondary audio and/or bookmark, etc. that
has been stored is erased.
1 Display the Tools menu.
With no disc loaded, press the TOOLS button.
2 Select and set the item.
Use / to select BDMV Data Erase, then press ENTER.
3 Erase the data.
Use / to select Yes, then press ENTER.
Caution
• It takes time to erase the BDMV data for a while. Do not unplug
the power cord for about 10 seconds after performing the above
procedure.
Switching the video
output terminal
Use the procedure below to switch the video output terminal. Switch
between the digital output (HDMI output) and the analog output
(Component Video output, S-Video output or Video output).
Switch the terminal from which the video signals are
output.
The video output terminal switches each time the button is pressed.
Caution
• The picture may not be displayed for a while when the video
output terminal is switched.
•When the HDMI OUT terminal is selected, no video signals are
output from the other video output terminals.
• When a video output terminal other than the HDMI OUT
terminal is selected, no video signals are output from the HDMI
OUT terminal. However, audio signals are output.
HOME
MEDIA
GALLERY
MENU
DISPLAY
POPUP MENU
TOP MENU
TOOLS
ENTER
Output Video Resolution
BDMV Data Erase
BD PLAYER
TOOLS
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Ye s No
Erases all of the data
added from BDMV.
Please wait a while.
OK to erase data?
VIDEO SELECT
PLAY MODE
HOME MEDIA
GALLERY
MENU
DISPLAY
POPUP MENU
TOP MENU
TOOLS
AUDIO
VIDEO
SECONDARY
O
UTPUT
RESOLUTION