Filter
Top Products
06
49
En
3 Select the terminal for outputting video signals.
Use / to select, then press .
When a digital output is selected for the video output terminal,
Video is fixed at HDMI and cannot be changed.
When an analog output is selected for the video output terminal,
Component Video or S-Video/Video can be selected for Video.
• HDMI – HDMI OUT terminal
• Component Video – COMPONENT VIDEO output terminals
• S-Video/Video – S-VIDEO output terminal or VIDEO output
terminal
The video and audio signals output from the set output terminals are
output synchronously (lip synchronization).
Caution
• If the output terminal you want to select at Video is not
displayed, use the VIDEO SELECT button to switch between
digital and analog output (page 24).
4 Select the terminal for outputting audio signals.
Use / to select, then press ENTER.
• HDMI – HDMI OUT terminal
• Digital Audio – DIGITAL OUT terminal (COAXIAL/OPTICAL)
• Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT
(7.1 ch) terminals
The optimum audio signals for the audio format and the player’s
settings are output from the output terminal(s) set here.
Caution
• Linear PCM (2-channel) audio signals are output from the audio
terminals other than the one set at Audio, regardless of the
audio format and the player’s settings.
Restoring all the settings to the
factory default settings
1 Check that the player’s power is turned on.
2 When a disc is playing, press to stop playback.
Eject the disc from the player.
3 While pressing , press STANDBY/ON.
Operate using the buttons on the player’s front panel.
Note
• After restoring all the settings to the factory default settings, use
Setup Navigator to reset the player (page 20).
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Audio
Output Terminal PriorityVideo Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
Video
Analog Audio
S-Video/Video