Filter
Top Products
Getting started
English
11
En
4 Press HOME MENU to exit the menu screen.
Playing discs
The basic playback controls for playing DVD, CD, Video CD/Super VCD and MP3/WMA discs are
covered here. Further functions are detailed in the next chapter.
For details on playing JPEG picture discs, see Viewing a JPEG slideshow on page 13.
4 Press (play) to start playback.
If you’re playing a DVD or Video CD/Super VCD, an on-screen menu may appear. See DVD-Video disc
menus on page 12 and Video CD/Super VCD PBC menus on page 12 for more on how to navigate
these.
• If you’re playing an MP3/WMA disc, it may take a few seconds before playback starts.
Note
• You may find with some DVD discs that some playback controls don’t work in certain parts of
the disc. This is not a malfunction.
Basic playback controls
The table below shows the basic controls on the remote for playing discs. The following chapter
covers other playback features in more detail.
Resume and Last Memory
When you stop playback of a disc, RESUME is shown in the display indicating that you can resume
playback again from that point.
If the disc tray is not opened, the next time you start playback the display shows RESUME and
playback resumes from the resume point.
With DVDs and Video CDs, if you take the disc out of the player, the play position is stored in memory.
If the next disc you load is the same one, the display shows LAST MEM and playback will resume.
If you want to clear the resume point, press (stop) while RESUME is displayed.
Note
• The Last Memory function doesn’t work with VR format DVD-RW discs.
• If you don’t need the Last Memory function when you stop a disc, you can press OPEN/CLOSE
to stop playback and open the disc tray.
1 If the player isn’t already on, press
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD/Super VCD, also turn on
your TV and make sure that it is set to the correct video input.
2 Press OPEN/CLOSE to open the disc tray.
3Load a disc.
Load a disc with the label side facing up, using the disc tray
guide to align the disc (if you’re loading a double-sided DVD
disc, load it with the side you want to play face down).
0
1
23
4
56
789
STANDBY/ON
OPEN/CLOSE
ENTER
ENTER
/
/
Button What it does
Starts playback.
If the display shows RESUME or LAST MEM playback starts from the
resume or last memory point (see also Resume and Last Memory on
page 11.)
Pauses a disc that’s playing, or restarts a paused disc.
Stops playback.
See also Resume and Last Memory on page 11.
(remote only)
Press to start fast reverse scanning. Press (play) to resume normal
playback.
(remote only)
Press to start fast forward scanning. Press (play) to resume normal
playback.
Skips to the start of the current track or chapter, then to previous tracks/
chapters.
Skips to the next track or chapter.
Numbers
(remote only)
Use to enter a title/chapter/track number. Press ENTER to select.
• If the disc is stopped, playback starts from the selected title (for DVD) or
track (for CD/Video CD/Super VCD).
• If the disc is playing, playback jumps to the start of the selected title (VR
mode DVD-RW), chapter (DVD-Video) or track (CD/Video CD/Super VCD).
DV370_En_A5New.book Page 11 Thursday, April 1, 2004 6:16 PM