Pioneer DVR-420H DVD Recorder User Manual


 
The Initial Setup menu
13
108
En
Optimized Rec
Default setting:
Off
On the default setting, if a timer program (standard, easy
or VIDEO Plus+ programming system) is set but there
isn’t enough space on the disc at the recording quality
set, the recording will start, but it will be cut off when the
disc is full. Set
Optimized Rec
to
On
to have the recorder
automatically adjust the recording quality to fit the
available disc space.
Note
You may notice a reduction in picture quality if the
recorder has to fit a lot of extra material into the
remaining time available on the disc.
If, even on recording level
MN
1
, there is insufficient
space available on the disc, the recording is made on
the HDD at the quality setting you originally
specified.
Optimized Recording only compensates for the first
(earliest starting) timer program if more than one has
been set.
Optimized recording works only with DVD
recordings.
Optimized recording can’t be used together with
VPS/PDC.
Navi Mark
Default setting:
0 seconds
In the Disc Navigator, each title is shown with a still
frame picture to remind you what it is. This setting lets
you decide the default still frame. The default setting of
0
seconds
takes the first frame of the title, but you can also
set it to
30 seconds
or
3 minutes
into the title (if the title
is shorter than the setting, then the first frame is used).
Auto Chapter (Video)
Default setting:
10 minutes
When recording in Video mode, a new chapter is started
every 10 minutes on the default setting. You can change
this interval to
15 minutes
, or switch off automatic
chapter marking altogether with the
No Separation
setting.
Frame Accurate
Default setting:
Off
When Frame Accurate setting is
Off
, exact frame
accuracy is traded for high-speed copying when
recording a Copy List. Switch Frame Accurate
On
to
preserve the accuracy of the Copy List. However, copying
some edited Video mode titles will be done in real time.
Important
When you change this setting the Copy List is erased.
Make sure it is set how you want it before you start
putting together a Copy List.
The Frame Accurate setting has no effect on the
actual video content stored on the HDD.
DVD-RW Auto Init.
Default setting:
VR Mode
When you load a new, blank DVD-RW disc the recorder
automatically initializes it for recording. You can set it to
initialize the disc for
VR mode
or
Video mode
recording.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
On
Off
Manual Recording
Optimized Rec
Navi Mark
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
0 seconds
30 seconds
3 minutes
Manual Recording
Optimized Rec
Navi Mark
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
No Separation
10 minutes
15 minutes
Manual Recording
Optimized Rec
Navi Mark
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
On
Off
Manual Recording
Optimized Rec
Navi Mark
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
VR Mode
Video Mode
Manual Recording
Optimized Rec
Navi Mark
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Initial Setup
DVR-04_HDD_UK.book 108 ページ 2004年4月11日 日曜日 午後6時11分