Filter
Top Products
Connecting up
02
20
En
Connecting other AV sources
Connecting a VCR or analog camcorder
1 Connect a set of audio and video outputs on
your VCR or camcorder to a set of inputs on this
recorder.
This enables you to record tapes from your VCR or
camcorder.
• You can use ordinary video or S-video cables for the
video connection.
• The front panel connections make convenient
connections for a camcorder.
2 Connect a set of audio and video inputs on your
VCR or camcorder to a set of outputs on this
recorder.
This enables you to record from this recorder to your VCR
or camcorder.
• You can use ordinary video or S-video cables for the
video connection.
• Alternatively, you can use the
AV2/AUTO START
REC (INPUT 1/DECODER)
SCART connector for
audio/video input and output with just one SCART
cable.
Connecting a DV camcorder
(DVR-520H/720H only)
Using the front panel
DV IN/OUT
jack, it is possible to
connect a DV camcorder or video deck, or DVD-R/RW
recorder and digitally transfer DV tapes or DVD-R/RW
discs to DVD-R/RW.
Important
• This jack is for connection to DV equipment only. It is
not compatible with digital satellite tuners or D-VHS
video decks.
1 Use a DV cable (not supplied) to connect the DV
in/out jack on your DV camcorder/deck to the front
panel DV IN/OUT jack of this recorder.
Plugging in
Before plugging in for the first time, make sure that
everything is connected properly.
1 Plug the supplied AC power cable into the AC IN
inlet and the other end into a standard household
power outlet.
Analog camcorder
VCR
AUDIO/VIDEO
OUTPUT
AUDIO/VIDEO
INPUT
1 2
AUDIO/VIDEO
INPUT
AUDIO/VIDEO
OUTPUT
DV IN/OUT
DV camcorder
DV IN/OUT
DV
IN/OUT
DV
IN/OUT
AC IN
DVR-04_HDD_UK.book 20 ページ ２００４年４月１１日 日曜日 午後６時１１分