Pioneer DVR-420H DVD Recorder User Manual


 
Getting started
04
30
En
Basic playback
This section shows you how to use your recorder for
playback of discs (DVD, CD, etc.), and for playback of
video from the HDD. More playback features, such as
repeat and program play, are covered in the next chapter.
Important
Throughout this manual, the term ‘DVD’ means
playback-only DVD-Video discs and DVD-R/RW. If a
function is specific to a particular kind of DVD disc, it
is specified.
Some DVD-Video discs don’t allow certain playback
controls to operate at certain points in the disc. This
is not a malfunction.
1 Press
STANDBY/ON to switch on.
Also turn on your TV and make sure that it is set to the
correct video input.
2 Press HDD to playback from the HDD, or DVD to
play a DVD.
If playing video from the HDD, skip to step
5
below.
3 Press
OPEN/CLOSE to open the disc tray.
4 Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you’re loading a double-
sided DVD-Video disc, load it with the side you want to
play face down).
If you want to play a DTS audio CD, please first read
the note on page 32.
5 Press
PLAY to start playback.
If you’re playing a DVD-Video or Video CD, a disc
menu may appear when you start playback. Use the
///
(cursor) buttons and
ENTER
to navigate
DVD disc menus, and the number buttons and
ENTER
for Video CD menus.
When playing video from the HDD, playback will
automatically stop after the end of a title is reached.
See the following sections for more details on playing
specific kinds of discs.
6 To stop playback, press
STOP.
7 When you’ve finished using the recorder, eject
the disc and switch the recorder back into standby.
To open/close the disc tray, press
OPEN/CLOSE
.
Remove the disc before putting the recorder into
standby.
Press
STANDBY/ON
to switch the recorder into
standby.
DVD RECORDER
STANDBY/ON
OPEN/CLOSE
ENTER
STOP
PLAY
DVR-04_HDD_UK.book 30 ページ 2004年4月11日 日曜日 午後6時11分