Filter
Top Products
Additional information
17
153
En
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
No video from the
HDMI output.
If you choose a setting that is incompatible with your TV you may not
be able to see any picture at all. In this case, press
(
PLAY
) while
holding down the
(
STOP
) button on the front panel to switch the
setting (this also switches
Component Video Out
on page 135 to the
default setting).
There’s no sound from
the connected HDMI or
DVI device.
• There is no sound when using a DVI terminal.
• Some HDMI-compatible devices do not output sound (check with
the manual that came with the connected device).
Message Explanation/Action
• Initializing disc. Please wait a
moment.
When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
• Incompatible region number.
The disc loaded has an incompatible region
number for the recorder and so will not play.
• Cannot record any more titles.
• No more space for file management
data.
The disc control data limit has been reached, or
the maximum number of chapters and/or titles
has been reached. Erase titles/chapters or
combine chapters.
• This disc cannot be recorded. Undo
the finalization.
The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
Problem
Remedy
DVR645H_WY_EN.book 153 ページ ２００６年７月５日 水曜日 午前１０時２５分