Filter
Top Products
Additional information
17
156
En
• Searching for a printer. Please wait a
moment. To cancel, press ENTER.
This message is displayed when the recorder is
scanning for a connected printer, or when the
printer is not yet ready for printing. If there is no
printer connected, please connect one.
If the message does not disappear, try
disconnecting then reconnecting the USB cable.
(Note that this recorder may not work correctly
with all printers.)
• The printer is not ready or is not
connected. Please check the printer.
This message is displayed when communication
could not be established with the printer. See the
Troubleshooting section if you do not know the
cause.
• Printing has been canceled because ...
This message is displayed when there is a printer
error during printing. After checking the printer for
the cause of the error, either reconnect the printer
and start the printing job again, or select "Yes" to
resume printing (select "No" to cancel the print
job). See also the operating instructions that came
with your printer for possible causes of print
errors.
Message
Explanation/Action
DVR645H_WY_EN.book 156 ページ ２００６年７月５日 水曜日 午前１０時２５分