Pioneer DVR-320 DVD Recorder User Manual


 
Getting started
04
34
En
5 Recording mode
Shows the current recording mode (
FINE
,
SP
,
LP
, etc.),
and the total recording time of the disc.
Note
When using the simultaneous play and record
feature, the display shows information for playback
only.
Data transfer rate shows the amount of video and
audio information recorded on the disc. It is not an
indication of picture/audio quality.
The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
The total recording time figure shown in parenthesis
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.
The frame number is shown next to the elapsed time
display when the disc is paused.
Copy Once
or
Can’t Record
messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
DVR-04_UK.book 34 ページ 2004年4月11日 日曜日 午後5時20分