Pioneer DVR-320 DVD Recorder User Manual


 
The Initial Setup menu
12
83
En
Decoder
– Use this setting if you are using a decoder
connected to the
AV2/AUTO START REC (INPUT 1/
DECODER)
input. (For scrambled channels, make
sure that the manual channel
Decoder
setting is set
to
On
—see also
Manual CH Setting
on page 80). Note
that on this setting, it is not possible to use Auto Start
Recording.
Note
When the
Input Line System
setting is set to
525
System
,
RGB
can’t be selected.
When the
Input Line System
setting is set to
625
System
,
RGB
can be selected, but if the
Input Line
System
is then changed to
525 System
, the
AV2/L1
In
setting automatically changes to
Video
.
See also
Input Line System
on page 78.
NTSC on PAL TV
Default setting:
On
When set to
On
, NTSC discs (from the U.S., for example)
will play correctly on a PAL-only TV. Change to
Off
if your
TV is already NTSC-compatible.
Depending on this setting and the Input Line System
setting (see
Input Line System
on page 78), the signal
format output when the recorder is stopped varies as
shown in the table below.
Note
Many recent PAL TVs are capable of correctly
displaying NTSC pictures without the need for this
setting. Check the manual that came with your TV if
you’re not sure whether yours has this feature.
Audio In settings
NICAM Select
Default setting:
NICAM
If you want to record the non-NICAM audio in a TV
broadcast, select
Regular Audio
, otherwise set to
NICAM
. (When set to
NICAM
, you can still select
Regular Audio
using the
AUDIO
button. See
Changing
audio channels
on page 29.)
Tuner Level
Default setting:
Normal
Set to
Compression
if the audio level from the built-in
tuner is excessively high causing distortion.
External Audio
Default setting:
Stereo
If the external source is standard stereo, leave set to
Stereo
. If each channel carries a separate soundtrack,
change to
Bilingual
.
DVR-320 only:
When the external audio is from the DV
input, an audio subcode channel within the DV audio
tells the recorder whether the audio is stereo or bilingual.
This has priority over the setting you make here.
Input Line System
NTSC on PAL
TV
Output when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Input Colour System
AV1 Out
AV2/L1 In
NTSC on PAL TV
On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
NICAM
Regular Audio
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
Normal
Compression
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
Stereo
Bilingual
Initial Setup
DVR-04_UK.book 83 ページ 2004年4月11日 日曜日 午後5時20分