Pioneer PDP-5030HD Flat Panel Television User Manual


 
E-7
Bunch cables using provided speed clamps
Attaching speed clamps to the main unit
Connect the speed clamps using the 4 holes marked with below, depending on your routing system.
Attaching and removing speed clamps
Insert 1 into an appropriate hole on the rear of the Plasma Display and snap 2 into the back of 1 to fix the
clamp.
Speed clamps are designed to be difficult to undo once in place. Please attach carefully.
Use pliers to twist the clamp 90°, pulling outward. The clamp may deteriorate over time and become damaged
if removed.
Gather cables into a bunch, secure with provided bead bands
A
Cables can be routed to the right or left.
Preparation
How to route cables
Speed clamps and bead bands are included with this System for bunching cables. Once properly bunched,
follow the steps below to route the cables.
As viewed from the rear of the display.
1
2
System cable Speed clamps Bead bands Speaker cable
System cableSpeaker cable Speed clamps Bead bands
To the left
To the right