Filter
Top Products
E-12
Watching TV
Simple operations for watching a TV program
Basic connection
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the Media Receiver.
A
• The Antenna and CABLE Converter cannot be connected at the same time.
A
OUT
B
A
OUT
B
Connecting VHF/UHF antenna
Connecting the CABLE Converter
VHF antenna UHF antenna
U/V mixer
Media Receiver (rear)
Media Receiver (rear)
CABLE TV
CABLE Converter
A
• Be sure connect the Antenna or the CABLE Converter as explained above. Signal reception may fail if not properly
connected.
• Be sure that the CABLE Converter output signal is assigned to the ANT-B input on the Media Receiver.
• How to change channels when the CABLE Converter output signal is connected to the ANT-B input on the Media Receiver.
•Press ANT on the remote control unit to switch to ANT-B.
•You can view an image right after selecting the output channel on the CABLE Converter.
Switching between Tuner A and Tuner B
To watch broadcasts via the two tuners, you can select it by pressing ANT on the remote control unit.
• While watching a broadcast press ANT to view the image received from the other tuner.
• Pressing ANT while viewing in Dual Screen mode (TV image and video image) with TV selected will display the TV image
of the other tuner.
• Pressing ANT while viewing Dual Screen with video selected will not change the image displayed.
• Pressing ANT while viewing Dual Screen with two TV images displayed will not have any effect.
• Pressing ANT while viewing Dual Screen with two video images displayed will switch the selected screen to a TV image.
The coaxial cable is already
connected at the time of
purchase.