Pioneer PDP-5030HD Flat Panel Television User Manual


 
E-43
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Useful adjustment settings
Option
MENU
Input Select
INPUT1 [AUTO]
AV-Y/C
AUTO
COMPONENT
Option
MENU
Input Select
INPUT3 [AUTO]
AV-Y/C
RGB
AUTO
COMPONENT
INPUT 1 signal menu
INPUT 3 signal menu
Input selection
Can use for selecting the input source.
1 Press INPUT on the remote control unit or on the
Plasma Display.
INPUT SOURCE menu displays.
2 Hold down INPUT on the remote control unit or on
the Plasma Display to select the input source.
An image from the selected source automatically
displays.
You can also select the input source by pressing a/
b.
A
Items grayed out are not selectable.
Input signal source
Input signal setting
For setting the signal type of external equipment.
1 Press MENU.
2 Press a/b to select Option, and then press SET/
ENTER.
3 Press a/b to select Input Select, and then press
SET/ENTER.
4 Press a/b to select an input source you want to
set, and then press SET/ENTER.
5 Press a/b to select a signal type, and then press
SET/ENTER.
If the selected signal type is incorrect, an image does
not display or no color image displays.
6 Press MENU to exit the menu.
A
Return to the previous menu by pressing MENU RETURN.
The System automatically sets input signals from
INPUT2, INPUT4 and PC.
If no image displays, try to change the signal type.
Check the operation manual of the external equipment
for the signal type.
Setting INPUT 1 and INPUT 3 signal selection to AUTO
when other equipment is connected will result in the
following connectivity priority.
TV
ANT INPUT
SURR
FRONT
AV
SELECTION
MTS CC
SPLIT
SELECT
SUB SUB CH
؀
؀
؁
؀
؁
FREEZE
MODE
CH VOL
RETURN
CH
MUTING
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
PLASMA DISPLAY
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
SCREEN
SLEEP LEARNEDIT/
DISPLAY
INPUT ؁
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
0
CH
ENTER
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
4. RGB INPUT