Pioneer PDP-507XD Flat Panel Television User Manual


 
29
En
Basic Adjustment Settings
08
English
Basic Adjustment Settings
Setting up TV channels automatically
This section describes how to automatically search for and set
up TV channels.
Using Auto Installation
When the Plasma Television is switched on for the first time
after purchase, the initial auto installation is initiated. You can
automatically set language, country and channels in
successive operations.
1 Select “Language” ( / ).
2 Select a language ( / ).
You can select from among 16 languages; English,
German, French, Italian, Spanish, Dutch, Swedish,
Portuguese, Greek, Finnish, Russian, Turkish,
Norwegian, Danish, Czech, and Polish.
3 Select “Country” ( / ).
4 Select the country ( / ).
5 Select “Tuner Type” ( / ).
6 Select a tuner type ( / ).
You can select among 3 options; “All”, “Digital”, and
“Analogue”.
7 Select “Aerial Power” ( / ).
Only selectable when “Digital” or “All” is selected for
“Tuner Type” in step 5. If not go to step 9.
8 Select “On” or “Off” ( / ).
9 Select “Start” ( / then ENTER).
Auto Installation automatically starts.
To quit Auto Installation in progress, press RETURN.
NOTE
You can start Auto Installation from the Home menu after
moving to another country, for example. Perform the
following steps 1 to 3 before starting Auto Installation.
Press HOME MENU.
Select “Setup” ( / then ENTER).
Select “Auto Installation” ( / then ENTER).
The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
If no channel is found, check the antenna connections, and
then retry Auto Installation.
Setting up analogue TV channels
manually
This section describes how to set up analogue TV channels
manually.
Using Manual Adjust
Use Manual Adjust to set up analogue TV channels manually.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Analogue TV Setup” ( / then ENTER).
The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9. For the password, see
“Using a password” on page 56.
4 Select “Manual Adjust” ( / then ENTER).
5 Select “Programme Entry” ( / ).
6 Select a programme number ( / ).
You can select 1 through 99.
7 Select “Search” ( / ).
8 Enter a frequency using buttons 0 to 9 and ENTER.
You can also press / to enter a frequency.
Auto Installation
Country
Language
Tuner Type
Aerial Power
Installation
English
Austria
All
Off
Start
Manual Adjust
Search
System
Programme Entry
Colour System
Store
Tuner NR
Child Lock
Decoder
42.75MHz
B/G
Auto
Off
View
On
No
1
Manual Adjust
Search
System
Programme Entry
B/G
1
42.75MHz