Pioneer DV-C302D DVD Player User Manual


 
15
MAKING CONNECTIONS
VIDEO IN
S-VIDEO IN
OPT.
DIGITAL OUT
AUDIO OUT
(
2CH
)
R
12
L
SUB
WOOFER
CENTER
AUDIO OUT
(
5.1CH
)
R
FRONT
L
SURROUND
VIDEO OUT
Y
P
B
P
R
S-VIDEO OUT
CONTROL
IN
AC IN
VIDEO
OUT
SELECT
COMPONENT
VIDEO OUT
AUDIO IN
RL
Making
Connections
Connection Guide
The illustration on this page shows the basic setup using
the audio and video cords included with this player. Use
this illustration as a guide to setting up your home
system.
An explanation of each type of audio and video
connection available can be found on pages 17 to 19. To
determine the best audio and video connection setup for
your system, refer to the manuals supplied with the
components you are making connections to.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General menu to set whether you are using a wide
screen or standard size TV or monitor (page 21).
Additionally, you can use the [TV Screen] setting in the
Setup screen Video menu (page 33).
Notes
• When making connections to this unit or when changing
connections, check that the unit is off by pressing
STANDBY/ON making sure that nothing is being displayed in
the display window, and then unplug the power cord from the
power outlet.
• The video output on this player uses copy protect circuitry to
prevent the video playback on DVDs from being copied. If you
connect the player to a TV via a VCR, or record and play back
the contents of a disc with a VCR, the playback picture may
not be normal.
Connecting Your DVD Player
Unlike any other audiovisual media format, DVD offers a
wide array of audio and video output options which
allows playback to be enjoyed in any number of system
configurations from a standard TV with stereo audio
input to a home theater system with a projection
monitor and full surround sound capabilities.
Audio cord
(Included)
Video cord
(Included)
TV or monitor
Make video connections from the VIDEO
OUT jacks on the player to the VIDEO IN jack
on the TV or monitor using the video cord
included with the player.
Make audio connections from one of the
AUDIO OUT jacks on the player to the
AUDIO IN jacks on the TV or monitor using
the stereo audio cord included with the
player. Be sure to match the color of the
plugs with the color of the jacks (red and
white).
Finally, connect to a
power outlet (120 V).