Filter
Top Products
23
MAKING CONNECTIONS
Setup Navigator
Audio1 GeneralLanguageVideo2
Move
Exit
SETUP
Select
ENTER
Confirm setup adjustments
Exit Setup Navigator
Redo
Invalid
Valid
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Settings: Valid*
Select to have the player make all of the
necessary audio, video, and language settings
according to your responses in the Setup
Navigator.
Invalid
Select to exit the Setup Navigator without
changing any of the system settings.
Redo
Select to return to the [OSD Language] screen
of the Setup Navigator and do the settings
again.
* Factory setting
To exit the Setup screen
When you have completed setting up the player using
the Setup Navigator or if you exit the Setup Navigator,
the Setup screen General menu appears. Press Setup
to close the Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup
screen menus is described on page 28 and 29.
Setting digital audio connections
to an AV amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier,
receiver, or external decoder. As there are numerous
options available, please refer to the instructions
supplied with the component the player is connected to
to determine what digital audio formats can be decoded.
If you have made no digital connections, select “Not
Connected”.
Settings: Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
* Factory setting
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or
not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in previous screens.
Settings: No*
Select if the connected AV component cannot
process an audio signal with a sampling rate of
96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate of
96 kHz.
Don’t Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
* Factory setting
Setup Navigator
Audio1 GeneralLanguageVideo2
Move
Exit
SETUP
Select
ENTER
Compatible with Dolby Digital
Not Connected
Dolby D/DTS/MPEG
Dolby Digital/MPEG
Dolby Digital/DTS
PCM
Dolby Digital
Amp Connection
Digital Jack
Setup Navigator
Audio1 GeneralLanguageVideo2
Move
Exit
SETUP
Select
ENTER
Digital jack not compatible with 96 kHz
96 kHz PCM Audio
Don't Know
Yes
No
Amp Connection