Pioneer DVR-310 DVD Player User Manual


 
The Initial Setup menu
14
108
En
Video In/Out
Input Colour
System
Next Screen
Proceed to the next screen to set the input colour
system for the external input and the built-in TV
tuner. Use the
CH +/–
buttons to change the preset.
On the default
Auto
setting the recorder can
generally correctly detect whether the input signal is
PAL, SECAM, 3.58 NTSC or PAL-60, but in some
cases you may have to set it manually if the picture is
displayed incorrectly.
See also About the input colour system on page 117 for more information on this setting.
Component Video
Out
Interlace •
Select if your monitor/TV is not compatible with
progressive-scan video.
Progressive
Select if your monitor/TV is progressive-scan
compatible. Check the operating instructions that
came with your monitor/TV if you’re not sure.
If your TV is incompatible with progressive scan video and you select
Progressive
, you will not be able to see any
picture at all
. In this case, press
OPEN/CLOSE
while holding down the
(Stop) button on the front panel
to switch to
Interlace
(this also switches Screen Resolution
on page 114
to the default setting).
When the HDMI signal is output, no video is output from the
COMPONENT VIDEO OUT
.
NTSC on PAL TV On
NTSC discs will play correctly on PAL-only TVs.
Off •
Use if your TV is already NTSC-compatible.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 117 for related information.
Audio In
NICAM Select
(except Taiwan and
Philippines model)
NICAM •
Record the NICAM audio in a NICAM broadcast.
Regular Audio
Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO
button before recording.)
Tuner Level
(except Taiwan and
Philippines model)
Normal •
Standard setting.
Compression
Use if the audio level from the built-in tuner is
excessive, causing distortion.
External Audio Stereo •
Select if the audio from the currently selected
external input is standard stereo.
Dual Mono/
Bilingual
Select if each channel carries a separate soundtrack.
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono/bilingual. This has priority over the setting you make here.
Setting
Options Explanation
DVR650HS_TLT_EN.book 108 ページ 2007年3月20日 火曜日 午後12時19分