Pioneer DVR-310 DVD Player User Manual


 
Recording
35
En
05
When HDD Recording Format is set to Video
Mode Off, high-speed copying from HDD to
DVD-R/-RW (Video mode) or DVD+R/+RW
isn’t possible. However, when SAP is
selected as the broadcast audio channel,
both the main and SAP channels are
recorded and you can switch the audio on
playback.
Other:
When set to Video Mode On, high-speed
copying from HDD to DVD-R/-RW (Video
mode) or DVD+R/+RW is possible. When
recording a bilingual broadcast, set which
channel you want to record from the Initial
Setup menu (see
Bilingual Recording
on
page 109).
When HDD Recording Format is set to Video
Mode Off, high-speed copying from HDD to
DVD-R/-RW (Video mode) or DVD+R/+RW
isn’t possible. However, both channels of
bilingual broadcasts are recorded and you
can switch the audio on playback.
Recorded audio
In all except the
LPCM
mode, sound is
recorded in two channel Dolby Digital format
(only Dolby Digital 2.0 can be recorded; Dolby
Digital 5.1 recording is not possible)
. When
set to
LPCM
, sound is recorded in high
quality, uncompressed Linear PCM format.
Taiwan and Philippines model:
If the broadcast audio has a SAP channel
and you are recording to Video mode DVD-R/
-RW, DVD+R/+RW, or to the HDD with the
HDD Recording Format set to Video Mode
On, or on the
LPCM
setting, use the
AUDIO
button to select the
Mono
,
Stereo
or
SAP
audio channel to record before recording
starts. In other cases, if SAP is selected then
both the main and SAP audio channels will
be recorded and you can switch on playback.
The table below shows the different audio
output possibilities:
Other:
If the broadcast audio is bilingual and you
are recording to Video mode DVD-R/-RW,
DVD+R/+RW, or to the HDD with the HDD
Recording Format set to Video Mode On, or
on the
LPCM
setting, use the Bilingual
Recording setting (page 109) to select the
A/
L
or
B/R
audio channel to record before
recording starts. In other cases, both
channels of a bilingual broadcast will be
recorded and you can switch on playback.
Restrictions on video
recording
You cannot record copy-protected video
using this recorder. Copy-protected video
includes DVD-Video discs and some satellite
broadcasts. If copy-protected material is
encountered during a recording, recording
will pause automatically and an error
message will be displayed on-screen.
Video that is ‘copy-once only’ can only be
recorded to DVD-RAM or HDD, CPRM-
compatible VR mode DVD-R/-RW (see
below).
When recording a TV broadcast or through
an external input, you can display copy
control information on screen (see
Displaying disc information on-screen
on
page 62).
Audio
setting
Audio output
Left (L) Right (R)
MONO
L + R L + R
STEREO
LR
SAP
L + R SAP
DVR650HS_TLT_EN.book 35 ページ 2007年3月20日 火曜日 午後12時19分