Pioneer DVR-310 DVD Player User Manual


 
Connections
02
18
En
Connecting to a cable box or
satellite receiver (1)
If you are using a cable box or satellite
receiver with only a few scrambled channels,
follow the setup on this page
1
. If many or all
the channels are scrambled, we recommend
using the setup on the following page.
Using the setup on this page you can:
Record unscrambled channels by
selecting them on this recorder.
Record scrambled channels by selecting
them on the cable box/satellite receiver
and using the Auto Start Recording
feature (see
Automatic recording from a
satellite tuner
on page 48).
Watch one channel while recording
another.
Important
Do not connect this recorder ‘through’
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amp/receiver.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch the output from
this recorder.
3 Connect the audio/video output of
your cable box/satellite receiver to the
INPUT 1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
Note
1 The diagram shows standard video connections, but you can alternatively use the S-video or component video
connections if they’re available.
AC IN
DIGITAL
AUDIO OUT
COAXIAL
HDMI OUT
CONTROL
IN
S-VIDEO
VIDEOAUDIO
L
R
ANTENNA
IN
OUT
S-VIDEO
VIDEOAUDIO
L
R
Y
P
B
P
R
OUTPUT 1
OUTPUT 2
COMPONENT VIDEO OUT
INPUT 1
/
AUTO START REC
INPUT 3
TV
Antenna/cable TV
wall outlet
Cable box/
Satellite receiver
ANTENNA
IN (RF IN)
ANTENNA
OUT
1
1
OUTPUT 1
INPUT 1/AUTO
START REC
1
2
3
To antenna input
To antenna input
From antenna output
To audio/video input
From audio/
video output
DVR650HS_TLT_EN.book 18 ページ 2007年3月20日 火曜日 午後12時19分