Pioneer DVR-310 DVD Player User Manual


 
The Initial Setup menu
14
116
En
Remote Control
Mode
Recorder 1–3
(default: Recorder 1)
If you are using more than one recorder in the same
room, set them to different IDs. This setting sets the
recorder ID; to change the remote controller ID, press
and hold
RETURN
then press
1
,
2
or
3
to set. The
remote will only control a recorder with the same ID.
DivX VOD Registration Code
Use to display the recorder’s DivX registration code.
See
DivX video compatibility
on page 10 and
DivX®
VOD content
on page 11.
Set Preview
(HDD only)
Quick Preview •
When in the Disc Navigator, the thumbnail video
plays short excerpts from throughout the selected
title. (Note that edited titles that will play normally
from the beginning.)
Normal
The thumbnail video plays from the beginning of the
title.
Options 2
USB
(DVR-650H-S/
DVR-550H-S only)
Restart USB
Device
If the connected USB device does not respond to the
recorder, try using this option to restart it. If the
device still does not work properly try switching it off
then back on, and/or disconnecting then
reconnecting the USB cable.
Confirm Printer
Use this option to confirm the make and model of the
printer connected to the recorder (does not work with
all printers).
HDD Sleep Mode Proceed
Puts the HDD to sleep. Using this feature when
playing DVDs or CDs allows you to reduce noise
produced by the unit, resulting in improved sound
quality. When you wake the HDD back up it will take
a few seconds to load.
The HDD can be taken out of Sleep Mode by any
number of actions, including:
Turning the power off and on again.
Pressing the
HDD/DVD
button and choosing the
HDD.
When a timer recording begins.
When you try and make any changes to system
settings.
Setting
Options Explanation
DVR650HS_TLT_EN.book 116 ページ 2007年3月20日 火曜日 午後12時19分