Filter
Top Products
The Video Settings menu
07
61
En
3 Adjust the picture quality settings.
• Use the joystick (up/down) to select a
setting.
• Use the joystick (left/right) to adjust the
current setting.
• Press
DISPLAY
to switch between full and
single view.
• You can recall the preset number from the
Recall Settings
menu item.
You can adjust any or all of the following
picture quality settings:
•
Prog. Motion
– Adjusts the motion and
still picture quality when the player is set
to progressive video output. This has no
effect when set to
ON
.
•
PureCinema
– When watching DVD
movies, PureCinema optimizes the
picture quality. The default setting is
Auto1
, but if the picture appears unnat-
ural, then set to
Auto2
,
ON
or
Off
, as
appropriate.
•
YNR
– Adjusts the amount of noise reduc-
tion in the Y (brightness) part of the video
signal.
•
CNR
– Adjusts the amount of noise reduc-
tion in the C (color) part of the video
signal.
•
Sharpness High
– Adjusts the sharpness
of the high-frequency (detailed) elements
in the picture.
•
Sharpness Mid
– Adjusts the sharpness
of the mid-frequency (less detailed)
elements in the picture.
•
Detail
– Adjusts the sharpness of edges
in the picture.
•
White Level
– Adjusts the intensity of
white.
•
Black Level
– Adjusts the intensity of
black.
•
Black Setup
– Setup to correct the
floating black color for better 3-dimen-
sional realism.
•
Gamma
– Adjusts the brightness of
darker images.
•
Hue
– Adjusts the overall color balance
between red and green.
•
Chroma Level
– Adjusts how saturated
colors appear.
•
Chroma Delay
– Adjust to correct the gap
between the Y and C components in the
video signal.
(This setting only affects
progressive video output.)
When the HDMI output is connected, the
following options also appear:
•
HDMI Color Adjust
– Adjusts the overall
color intensity in the HDMI video signal
(select between
Standard
and
Enhanced
).
•
HDMI Detail
– Adjusts the sharpness of
edges in the HDMI video signal.
4 Press ENTER to save the preset and
exit the Video Adjust screen.
• Video on a DVD discs may be either video
material (originally shot on video) or film
material (originally shot on film). Video
material has a frame rate of 30 frames/
sec.(NTSC), compared with 24 frames/
sec. for film. This player converts film
material to 60 frames/sec. (in progressive
scan mode). PureCinema adjusts the
picture so that it matches more closely
the picture quality of a cinema screen.
Memory1
Auto 1
Recall Settings
Prog. Motion
PureCinema
YNR
CNR
Sharpness High
Sharpness Mid
soft
fine
fast
slow
min
max
min
min
max
max
Memory1 1/3
DV-59AVi.book(KU).fm 61 ページ ２００３年８月２０日 水曜日 午後６時４６分