Pioneer DV-59AVI DVD Player User Manual


 
Initial Settings menu
08
80
En
Using this setting you can specify up to five
receivers to automatically switch input func-
tion to this player when you start playback of
a disc. Highlight a receiver from the list and
press
ENTER
.
The most recently selected component is
marked with a orange box (
). The i.LINK
output when playing Dolby Digital, DTS or
MPEG discs will be as set for this component
(see also Connections Setup above).
Select
Off
to reset all the settings.
When the i.LINK connections are changed,
the following screen appears.
Press
ENTER
to return to the menu screen.
Whether a receiver from the list has been
selected or not, this player will start play-
back when you change the input function
of the receiver to this player.
Note that some AV receivers may not be
compatible with this feature.
DVD-Audio Out
Default setting:
5.1 Channel
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Set this to
5.1 Channel
to enjoy surround
sound when playing multichannel discs.
To downmix a multichannel source when
using the i.LINK connection, set to
2 Channel
for stereo output.
When set to
5.1 Channel
, you’ll only get
sound from all speakers when playing
multichannel discs.
Some DVD-Audio discs don’t allow down-
mixing of audio. These discs always
output multi-channel audio regardless of
the setting made here.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Out
Connections Setup
Auto Select Play
DVD-Audio Out
Off
VSX-49TXi
VSA-AX10
Initial Settings
Connections were changed
and thus updated.
ENTER
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Out
Connections Setup
Auto Select Play
DVD-Audio Out
2 Channel
5.1 Channel
Initial Settings
DV-59AVi.book(KU).fm 80 ページ 2003年8月20日 水曜日 午後6時46分