Filter
Top Products
The video recorder needs the following information for every
programmed recording:
* the date on which the recording is to be made
* the programme number for the TV channel
* the start and stop time of the recording
* VPS/PDC on or off
* the recording speed (SP/LP)
The video recorder stores all the information mentioned above
in a TIMER block. You can programme up to 6 TIMER blocks,
one month in advance.
’VPS’ (Video Programming System)/
’PDC’ (Programme Delivery Control)
With ’VPS/PDC’, the TV station controls the beginning and the
length of the programmed recording. This means that the
video recorder switches itself on and off at the right time even
if a TV programme you have programmed begins earlier or
finishes later than expected.
Usually the start time is the same as the VPS/PDC time. If,
however, in the TV guide, in addition to a TV programme’s start
time, a different VPS/PDC time is given, e.g.: ’20.15 (VPS 20.14)’,
you must enter ’20.14’ as the start time exactly to the minute.
If you want to enter a time that differs from the VPS/PDC time,
you must switch off ’VPS/PDC’.
DWith most TV stations the VPS/PDC time is always the
same as the start time.
Programming with ’VIDEO Plus+’
All the information required for a programming is contained
encoded in the PlusCode programming number.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the TIMER s button on the remote control.
The programming mode selected last is marked.
c Select the line ’VIDEOPLUS PROGRAMMING’ with the
menu buttons P = or P ; and confirm with the menu
button OK .
d Enter the entire PlusCode number (up to 9 digits) printed
in your TV guide next to the start time of a TV programme.
If you made a mistake, clear with the CLEAR (CL) button.
TIMER
VIDEOPLUSPROGRAMMING
12345678
________________________________
MO-FR/WEEKLY TOSTORE
PRESS SELECT PRESS OK
e Select programming at daily or weekly intervals with the
SELECT button.
’MO-FR’: Recording at daily intervals from Mondays to
Fridays inclusive.
’WEEKLY’: Recording at weekly intervals on the same day
of the week.
f After you confirm with the OK button, the data will ap-
pear on the TV screen.
DIf the VIDEO Plus+ system does not recognize the TV
channel, ’PLEASE ENTER PROGRAMME NUMBER’ ap-
pears on the TV screen. Select the required programme
number (programme name) with the P ; or the P = but-
ton. Confirm with the OK button.
DIf ’PLUSCODE NUMBER WRONG’ appears on the TV
screen, you entered an incorrect PlusCode number or the
incorrect date. Repeat the entry or end with the
TIMER s button.
DIf ’WEEKEND PROGRAMMING - NOT POSSIBLE’ appears
on the TV screen, the date was incorrectly entered.
’Daily’ programming can only be used for recordings to
be made from Mondays to Fridays inclusive.
DUse the SELECT button to switch ’VPS/PDC’ on or off in
’START’.
DUse the SELECT button to select the recording speed ’SP’
or ’LP’ in ’END’.
g Confirm with the OK button.
DThe data has been stored in a TIMER block.
h To end, press the TIMER s button.
4. AUTOMATIC (PROGRAMMED) RECORDING
12