Filter
Top Products
k Repeat steps h to j until all TV channels have been
allocated.
l To finish, press the MENU button.
Connecting a decoder or additional
equipment
You can also connect additional equipment to the AV2 EXT2
socket. For instance: decoder, satellite receiver or camera
recorder.
You can connect a HIFI-stereo set to the sockets
AUX OUT L R (audio output left/right) and AUX IN L R (audio in-
put left/right).
Allocating a decoder
With this function, the connected decoder will automatically
be activated for the TV programme required.
DWith ’Connecting with scart cable and ’Easy Link/NexT-
View’ the decoder must be activated for the TV set.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b On the video recorder, select the TV programme you wish
to link with the decoder function, using the P ; or P =
button or the digit buttons 0-9 .
c Press the MENU button. The main menu appears.
d Select the line ’INSTALLATION’ with the menu buttons
P = or P ; and confirm with the P button.
e Select the line ’MANUAL SEARCH’ with the menu buttons
P = or P ; and confirm with the P button.
f Select the line ’DECODER’ with the menu buttons P = or
P ; .
g Select function ’ON’ with the menu buttons Q or P .
When you select ’OFF’, the function will be switched off.
h Confirm with the OK button.
DWhen the function is switched on, ’DEC’ appears in the
display.
i To end, press the MENU button.
Manual TV Channel Search
In certain cases the ’Automatic TV Channel Search’ may not
be able to find all of the TV channels (e.g. coded TV channels).
In that case, use this manual method to set the channels.
DWith ’Connecting with scart cable and ’Easy Link/NexT-
View’ the videorecorder automatically loads the TV
channels from the TV set. Hence, some lines are not
functional.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’INSTALLATION’ with the menu buttons
P = or P ; and confirm with the menu button P .
d Select the line ’MANUAL SEARCH’ with the menu buttons
P = or P ; and confirm with the menu button P .
INSTALLATION
MANUALSEARCH
CHANNEL/FREQ. CH
z ENTRY/SEARCH 34
PROGRAMMENUMBER | 02 }
{ TVCHANNEL NAME MTV
DECODER OFF
TVSYSTEM PAL
NICAM ON
FINETUNING +1
________________________________
TOEXIT
PRESS MENU
e In the line ’CHANNEL/FREQ.’, select the display for:
’FREQ.’: frequency
’CH’: channel
’S-CH’: special channel
f If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’ENTRY/SEARCH’
with the digit buttons 0-9 .
5