Planar XP17WSA Flat Panel Television User Manual


 
7. Connect the attached USB cable to
PC and LCD.
The connecting to PC is completed.
To connect the LCD to TV antenna or
VCR, please see the section of
“Connecting to TV Antenna and AV
System.”
8. Turn on the power of LCD and the power of PC.
When the LCD power is on, the power LED light is in green.
The power LED light is in orange and the screen does not have image under
the following conditions:
When there is no image from the PC.
When image signals transmitted are not supported by the LCD.
When the LCD is in “suspend” mode.
The “suspend” mode may be removed when pressing any key of the keyboard or
moving the mouse.
9. During cable connection
Make sure the power of this product is off when connecting the LCD cables,
antenna or VCR cables. The screen display will become messed up if the cables
are connected under Power On state.
10. When not in use for a long duration
Do not leave the LCD in the state of no-signal (screen pitch dark) for a long period
of time. When in standby mode, the upper right corner of the screen will continue to
show the display mode (S-VIDEO, VIDEO 1 or VIDEO 2) and “residual image”
phenomenon might occur (). If the LCD is not in use for a long duration, turn off
its power.
Residual image phenomenon means there is residue of previous image even
when other images are displayed.
9