Planar XP17WSA Flat Panel Television User Manual


 
Auto-Adjust (in case of analog connection only)
This product has built-in auto adjust function to obtain the best image display.
If the LCD has analog connection, perform auto adjust first.
No auto adjust is necessary in case of digital connection.
1. Turn on the power in the sequence of peripherals (including this product)
Æ computer.
2. Press the OSD MENU button.
OSD Main Menu is displayed.
3. Use e/f button to select the desired “basic setting”, then press OSD
MENU again.
4. Use e/f to select AUTO, then press + button.
The product will carry out auto adjust.
In case of Macintosh, boot the operating system and perform steps 2 ~
4 above after the screen display becomes still.
The auto adjust will take a few seconds, during which you won’t be able
to perform OSD function. If the effect of auto adjust is not satisfactory,
carry out manual adjustment.
17