Filter
Top Products
10
11
4.1.3 Management Setting Through Terminal Emulator
There are three items in the Main Menu, System Function, Conguration and SNMP
Conguration.
4.1.3.1 System Function
There are three items in System Function menu, “Software Reboot, Factory Reset, and
Image Update.
4.1.3.1.1 Software Reboot
After conguring, it needs to reboot the software setting in order to run the device
properly.
4.1.3.1.2 Factory Reset
This function is to set the device back to the default setting in case of the messy setting.
4.1.3.1.3 Image Update
The section is to set the TFTP Server IP Address rst, and the default address was set
to “192.168.1.2”. The Image File can be updated by uploading the image le from the
TFTP server.
Note: The content of the image file will write the whole firmware of the man-
agement module, please be sure that the image file is correct.
4.1.3.2 Conguration
To set the Software Reboot, Factory Reset and Image Update.