Filter
Top Products
16
17
System Name: to authorize the device system name.
Location: to show the WMC-1600R where it is located.
Refresh time: to set the refreshing time of the device through the web.
NOTE: After configuring the system device, need to press the save button to
save the setting.
4.2.2.2 System Conguration
MAC Address: will show out the MAC address of the Management interface.
IP Address: to allocate an IP address for the Management interface, the default IP is
“192.168.1.1”.
Subnet Mask: to set the Subnet Mask, the default is 255.255.255.0”.
Default Gateway: to set the gateway address, the default is “192.168.1.254”.
NOTE: After configuring the system device, need to press the save button to
save the setting.
4.2.2.3 SNMP Conguration
Get Community Name: to get the device community name (default = public).
Set Community Name: to set the device community name (default = private).
Trap Community Name: to authorize the device trap community name (default =
public).
Trap Host IP Address: to set the trap host IP address (same as monitoring station IP
address).
Cold Start trap: to set the trap for rebooting the device (default = enable).