Planet Technology 170S8FS Cable Box User Manual


  Open as PDF
of 26
 
16
17
4.2.1 System Function
There are four items in System Function menu, “Software Reboot, Factory Reset, Image
Update and Conguration Update.
4.2.1.1 Software Reboot
Reboot the management module in order to run the new setting properly.
4.2.1.2 Factory Reset
This function is to set the device back to the default setting in case of the messy setting.
4.2.1.3 Image Update
The section is to set the TFTP Server IP Address rst, and the default address was set
to “192.168.1.2”. The Image File can be updated by uploading the image le from the
TFTP server.
Note: The content of the image file will write the whole firmware of the man-
agement interface, please be sure that the image file is correct.
4.2.1.4 Conguration Update
The section is explaining how to upload and download the congure setting of the
management interface. The Conguration Upload is to restore a setting le to the
management interface. The Conguration Download is to backup the setting from the
management interface.
4.2.2 Conguration
There are ve items in Conguration menu, General Conguration, System Conguration,
SNMP Conguration, Location Setting and Redundant Backup Setting.
4.2.2.1 General Conguration
Hardware revision: noted the version of the WMC-1600R.
BIOS revision: noted the version of the BIOS.
Firmware revision: noted the version of the rmware.
Change Password: the changing of the administrator password.
Conrm Password: to conrm the setting of administrator password.
 previous next