Filter
Top Products
2
3
Chapter 2
UNPACKING AND INSTALL
This chapter provides unpacking and setup information for the Media Converter Chassis.
2.1 Unpacking
Open the box of the WMC-1600R and carefully unpack it. The box should contain the
following items:
• One Intelligent Media Converter Chassis with one power supply installed
• One RS-232 Cable
• One Power Cord
• CD-ROM
• Rack mounting Kit
• This User’s Manual
If any item is found missing or damaged, please contact your local reseller for replacement.
2.2 Installation
The site where you place the chassis system may greatly affect its performance. When
installing, take the following into your consideration:
As with any electric device, you should place the equipment where it will not be subjected
to extreme temperatures, humidity, or electromagnetic interference. Specically, the site
you select should meet the following requirements:
- The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40
degrees Celsius).
- The relative humidity should be less than 90 percent, non?condensing.
- Surrounding electrical devices should not exceed the electromagnetic eld (RFC)
standards for IEC 801?3, Level 2 (3V/M) eld strength.
- Make sure that the equipment receives adequate ventilation at the rear. Do not block the
fan exhaust holes on the rear of the chassis.
- The power outlet should be within 1.8 meters of the chassis.
2.3 Deciding How to Install the System
We strongly suggest that you install the chassis rst, as this is more convenient for you
to install media converters into the chassis with ease. The accessories supplied in the
product package include: rack-mount screws (8 pcs) and rack-mount brackets (2 pcs).
This well-built chassis can be installed in the following ways: