Filter
Top Products
34 Chapter 2
Using the Remote Control
Tips
The component button corresponding to
the mode you’re in fl ashes when the remote
batteries are low and you press a button on the
remote. A warning banner may also appear on
the screen when you press a remote button and
your batteries are low.
To turn off most RCA components that are
connected to the TV, press ON•OFF twice within
two seconds and hold remote steady until all
indicators turn off.
The Buttons on the Remote Control
Arrows (up, down, left, right) Used to move through the on-screen menus.
(0-9) Number Buttons Enter channel numbers and time settings.
ANT•CAB Switches between Antenna and Cable Input. In VCR mode,
functions as a TV/VCR button. When tuned to an input, press to go back to the
most recently used tuner (Antenna or Cable Input). In SAT mode, functions as a
TV/SAT button for an RCA satellite receiver.
AUDIO Places the remote in audio mode to operate a device (such as a
audio receiver, or amplifi er receiver) that you’ve programmed to work with this
button. This button lights when you press a valid button in AUDIO mode (see
Modes of Operation on page 38 for more details).
AUX•HD Places the remote in auxiliary mode to operate a device (such
as a cable box, satellite receiver, VCR, DVD, or audio receiver) that you’ve
programmed to work with this button. AUX by default is set up for an RCA
HDTV Tuner. This button lights when you press a valid button in AUX•HD
mode (see Modes of Operation on page 38 for more details).
BACKLIGH T Press to illuminate some of the remote control’s buttons. To
conserve battery power, the light turns off after several seconds. Backlight
won’t activate if batteries are low, but blinks on and off quickly.
CC (Closed Captioning) Toggles closed captioning on and off, if available
for the channel you’re tuned to. When you change channels or inputs, the
default for Caption Display is restored.
CH + or CH – Scrolls up or down through the channel or input list. Press
once to change the channel up or down; press and hold to continue changing
channels. Pages up and down through Listings in the TV Guide On Screen
system.
CLEAR Removes on-screen menus and displays. Cancels the commercial skip
timer.
DVD Places the remote in DVD mode. If Auto Tuning is enabled, pressing
the DVD button turns on the TV and tunes to the correct Video Input Channel.
This button lights when you press a valid button in DVD mode (see Modes of
Operation on page 38 for more details).
FORMAT Toggles through video screen formats- Normal, Cinerama (only
available for 4:3 formats), FlexWide, Zoom, and Auto Format.
FREEZE Freezes entire screen. Caution: When recording from VIDEO
OUTPUT, freezes the video you’re recording.
GO BACK Returns you to the previous channel or previous screen in the
menu system. Also, toggles between tuner and input sources.
GUIDE Brings up the TV Guide On Screen system with the Listings screen
displayed.
INFO Brings up the Channel Banner with channel and viewing information.
Press again to remove the banner. In the TV Guide On Screen system, displays
additional Help information for a highlighted item, if available.
STOP PAUSE
TV
ON•OFF
AUX•HDDVD SAT•CABLE
CC PRESETS FREEZESOUND
PLAY FORWARDREVERSE
GUIDE
GO BACK
V
O
L
V
O
L
FORMATMUTE
INFO
MENU
CLEAR
SKIP
ANT•CAB
1
2
3
4
5
6
7
8
9
0
INPUT
VCR
AUDIO
OK
RECORD
BACKLIGHT
P
A
G
E
+
P
A
G
E
-
CH +
CH –