Filter
Top Products
Connections & Setup
22 Chapter 1
VIDEO INPUT 5/AUDIO INPUT 5 Provides DVI-HDTV and analog audio
connections.
• L/MONO AUDIO provides left audio connection and connector is usually
white.
•R AUDIO provides right audio connection and connector is usually red.
• DVI-HDTV provides a digital video connection from a video source to the TV.
RECORD OUTPUT Connect a VCR or DVD-recorder to record mainly digital (or
analog) programs from Antenna A or B and inputs (excluding DVI-HDTV and some
component video formats) while TV is turned on. You must leave TV on same
channel you are recording.
• VIDEO provides composite video connection and connector is usually yellow.
• AUDIO L provides left audio connection and connector is usually white.
• AUDIO R provides right audio connection and connector is usually red.
Notes: When recording from this output, remember to tune to the channel
you are recording.
If an unusual pattern appears when you connect your VCR input to the
RECORD OUTPUT, playing a tape or switching to the VCR’s tuner removes the
pattern.
DIGITAL AUDIO OUTPUT Use a digital optical cable (or SPDIF cable) to connect
your TV to a compatible Dolby Digital or PCM receiver or decoder. Dolby Digital
offers theatre-quality sound (six audio channels). Use the Digital Audio Out screen
in the Audio menu to select Auto Select or PCM as the output for this jack.
ETHERNET Connect a router, cable modem, or Digital Subscriber Line to the TV
using an Ethernet cable (CAT 5). Do not connect a telephone cable because of risk
of fire or shock. A green light on the jack means that an active network has been
detected. An orange light means the data is either being sent or received.
DTVLink Use either or both connectors to connect compatible DTVLink (IEEE-
1394) components but don’t loop the components together. When connecting
several components, use a hub or component-to component method. Be sure to
connect the fastest of the 1394 components closer to the connection point of the
TV and the slower components furthest away. Details on page 16.
ANTENNA A INPUT / ANTENNA B INPUTs Used to connect an off-air antenna
and/or cable TV signal to the TV. If you have both cable and air, connect cable to
ANTENNA A and off-air to ANTENNA B. If you have air only, connect it to
ANTENNA A. These inputs are also used to receive programming and connect
older components.
G-LINK Connect the G-LINK cable for VCR one touch recording and/or cable box
control with GUIDE Plus+ system.
VIDEO
RECORD
OUTPUT
AUDIO
R
L
ETHERNET
ANTENNA B
INPUT
ANTENNA A
INPUT
G-LINK
L/
MONO
R
AUDIO
INPUT 5
VIDEO
INPUT 5
DVI-HDTV
Digital Audio
Output Jack