Filter
Top Products
24 Chapter 2
Using the Remote Control
The Buttons on the Remote Control
Arrows (up, down, left, right) Used to move through the on-screen menus.
(0-9) Number Buttons Enter channel numbers and time settings. Also used
in the TV menu to make selections.
ANT•CAB Switches between Antenna and Cable Input. In VCR mode,
functions as a TV/VCR button. In SAT mode, functions as a TV/SAT button for
an RCA satellite receiver. When tuned to an input, press to go back to the most
recently used tuner (Antenna or Cable Input).
AUDIO Places the remote in audio mode to operate a component (such as a
audio receiver or amplifi er receiver) that you’ve programmed to work with this
button. This button lights when you press a valid button in AUDIO mode (see
Modes of Operation on page 28 for more details).
AUX •HD Places the remote in auxiliary mode to operate a component (such
as a cable box, satellite receiver, VCR, DVD, or audio receiver) that you’ve
programmed to work with this button. AUX by default is set up for an RCA
HDTV Tuner receiver. This button lights when you press a valid button in
AUX•HD mode (see Modes of Operation on page 28 for more details).
BACKLIGH T Press to illuminate some of the remote control’s buttons. To
conserve battery power, the light turns off after several seconds. Backlight
won’t activate if batteries are low, but blinks on and off quickly.
CC (Closed Captioning) Toggles closed captioning on and off, if available
for the channel you’re tuned to. When you change channels or inputs, the
default for Caption Display is restored.
CH + or CH – Scrolls up or down through the channel or input list. Press
once to change the channel up or down; press and hold to continue changing
channels.
CLEAR Removes on-screen menus and displays. Cancels the commercial skip
timer.
DVD Places the remote in DVD mode. If Auto Tuning is enabled, pressing
the DVD button turns on the TV and tunes to the correct Video Input Channel.
This button lights when you press a valid button in DVD mode (see Modes of
Operation on page 28 for more details).
FORMAT Toggles through the 4:3 video screen formats (Normal, Zoom,
Stretch, Cinerama, and Auto Format) for some 4:3 signals—not applicable to
16:9 signals.
FREEZE Freezes entire screen. When recording from VIDEO OUTPUT, freezes
digital, but not analog channels.
GO BACK Returns you to the previous channel or previous screen in the
menu system.
GUIDE If you’re controlling another component that has a guide, this accesses
the on-screen guide.
STOP PAUSE
TV
ON•OFF
AUX•HDDVD SAT•CABLE
CC PRESETS FREEZESOUND
PLAY FORWARDREVERSE
GUIDE
GO BACK
C
H
+
C
H
-
V
O
L
V
O
L
FORMATMUTE
INFO
MENU
CLEAR
SKIP
ANT•CAB
1
2
3
4
5
6
7
8
9
0
INPUT
VCR
AUDIO
OK
RECORD
BACKLIGHT