Filter
Top Products
Using the TV's Menu System
30 Chapter 4
Additional Options in PC Mode
The Picture menu in PC mode contains some additional menu options.
Hor Position Adjusts the picture's position left or right.
Ver Position Adjusts the picture's position upward or downward.
Phase Adjusts the picture if there is fl icker of screen letters, color
misalignment, or blurring.
Clock Adjusts the clock sync of the picture.
Red, Green, or Blue Adjusts the red, green, or blue colors of the
picture.
WXGA Input Turn this option ON in order to change the screen size
of the picture in PC mode.
Reset Restores PC Settings menu to the default settings.
Audio Menu
The AUDIO menu ( ) lets you adjust the audio output. To access
the Audio menu, press MENU on the remote, and then select the
Audio icon from the Main Menu. The following audio items can be
adjusted:
MTS
Stereo Splits the incoming stereo audio signal into left and right
channels. Most TV programs and recorded materials have stereo
audio. The word Stereo appears in the channel banner when you
tune to a program that is broadcast in stereo.
SAP Plays the program's audio in a second language, if one is
available. SAP audio is broadcast only in mono. SAP is also used to
broadcast a program's audio with descriptions of the video for the
visually impaired.
Mono (available for regular TV viewing only) Plays the sound in
mono only. Use this setting when receiving broadcasts with weak
stereo signals.
Bass Increases or decreases the bass of the sound.
Treble Increases or decreases the treble of the sound
Balance Adjusts how much audio is sent to the left and right
speakers.
Surround Turn on to have surround effect.
HDMI If you're using the HDMI jack for a DVI connection, select
DVI. If not, select HDMI.
Audio Language Choose the language you prefer for dialog on
digital channels. If your preferred language is being broadcast with
a program, then the TV plays it. If not, then the TV plays the default
audio for the program (usually English in the U.S.).
Digital Audio Output Lets you choose a setting for the DIGITAL
AUDIO OUTPUT jack. Choose AutoSelect and the TV selects the audio
for you (either *Dolby® Digital decoding or PCM). Choose PCM if your
audio receiver only handles PCM.
Reset Restores the Audio Menu to the default settings.
PICTURE
BRIGHTNESS 25
CONTRAST 50
HOR POSITION 25
VER POSITION 25
PHASE 25
CLOCK 0
:SELECT
:ADJUST
AUDIO
MTS STR / SAP / MONO
52SSAB
TREBLE 25
BALANCE 0
SURROUND OFF
:SELECT
:ADJUST
* Dolby is a trademark of Dolby Laboratories.