Filter
Top Products
Thelabelingfeatureletsyouprogram
names(or labels)for thechannel
numbers.Thenameyouprogram
will thenappearonthescreenbelow
thechannelnumberwheneverthe
channelnumberisdisplayed.
Eachnamecancontainupto four
characters,andyou'll beableto
assignupto 64names.After 64
names or labels have been entered,
the TV will display this message to
let you know no more channels can
be labeled: CHAN LABEL: FULL.
Listed below are the letters and
characters from which you'll be able
to choose when programming the
channel labels:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
(blank space) ! • # $ % &' ( )
.5+,-./0123456789:;
< =>?.@
You must use your remote control to
create or erase labels.
Labeling Channels (with remote only)
1. Repeatedly press MENU to select
SETUP MENU, and then press + or-
to display setup functions. Repeatedly
press MENU to select CHAN LABEL
function.
o Press + to enter the CHAN LABEL
function. Four blank letter frames
will appear under the channel number.
o
Select the channel number you want
to label by pressing the CHANNEL up
or down button (or by pressing two
number buttons).
.
Press and hold the VOLUME up or
down button until the letter or
character you want appears on the
screen. Pressing VOLUME up
sequences through the characters in
alphabetical order. Pressing
VOLUME down sequences the letters
in reverse order.
5. Then press + to move to the next
letter frame. Pressing - moves you
back to the previous letter frame.
o
Repeat steps 4 and 5 until the name
is complete. You can now label
another channel, if desired, by
selecting the channel number and
repeating steps 4 and 5.
o
When finished, the display will
automatically disappear from the
screen in a few seconds. Your
labels will remain in memory until
you erase them. They are not
affected by power failures.
Erasing Labels ,
To erase a channel label, first follow
steps 1, 2, and 3 above, and then press
CLEAR on the remote control.
Note: Autoprogramming new channels
into the channel memorydoes not effect
the channel labels thatare already entered.
22