Filter
Top Products
The CABLE CHAN function lets you
program to which channel the TV
will automatically tune when you
press the CABLE button on the
remote. This is handy if you have to
connect a cable box to your TV. You
will no longer have to remember the
output channel of the cable box
because the TV will remember for
you.
For example, if you connect a cable
box to the TV's CABLE/ANTENNA
connector (as shown on page 33 or
34), you will no longer have to
remember to select channel 2, 3, or 4
on the TV to see what's coming from
the cable box. By entering the cable
box's output channel (usually 02, 03,
or 04) next to the CABLE CHAN
function, the TV will automatically
tune to that channel each time you
press the CABLE button on the
remote.
This function is especially convenient
if you have a remote-controllable
cable box that can be operated by the
CABLE button on the remote (as
described on page 35). Pressing the
CABLE button will then not only
switch the remote to cable mode but
will also automatically tune the TV to
the proper channel for viewing the
picture from the cable box.
Note: Pressingthe CABLEbutton does not
changebetweenANTA andANTB antenna
inputsasexplainedonpage 18. Pressthe
ANT buttonon the remote controltochange
antennainputs if necessary.
-Setting Up Cable Box Channel (with or without remote)
1. Repeatedly press MENU to select the
SETUP MENU, and then press + or -
to display the setup functions.
Repeatedly press MENU to select the
CABLE CHAN function.
3. Press the + button to program the
channel number you selected into
the CABLE CHAN function memory.
.
Enter the channel number you want to
program by pressing two digit buttons
on the remote control. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later press the CABLE
button on the remote.) The TV will
change to the channel you select.
This will help you to confirm that it is
indeed the channel you want the TV
to automatically tune. Most cable
boxes output their signals on either
channel 02, 03, or 04.
Note: Pressing the - button here will
turnoff this feature and display
CABLE CHAN: OFF again.
27