Filter
Top Products
The digital remote control that came packed with your TV
controls your TV and up to two compatible RCA VCRs.
To control a compatible RCA VCR, first press the VCR1 or
VCR2 button to put the remote in the "VCR mode". The
buttons shown below will then control the VCR.
Selected models of RCA VCRs have a switch that lets you
determine which VCR will be controlled by the VCR1 button,
and which VCR by the VCR2 button. Other models have an
OFF/ON Button
Press to turn off VCR.
Number Buttons
• Press two numbers to select
channel.
• Press a "0" before a single-digit
channel number.
PROG (Program) Button
Used when setting the clock and
programming the timer.
ANT Button
Same as VCR or TV/VCR button on
front of VCR. Lets you record one
channel with VCR and watch another
channel on TV.
PAUSE Button
• Press to pause play or record
mode.
PLAY Button /
Press to start tape playing. /J
/
/
REWIND Button J
• Press while VCR is stopped to
rewind tape.
• Press while VCR is playing to
search backward.
FF (Fast Forward) Button
• Press while VCR is stopped to
fast forward tape.
• Press while VCR is playing to
search forward.
on-screen menu that lets you determine if it will be controlled
by VCR1 or VCR2. Additional information about controlling
two RCA VCRs is in the note on the next page.
If you have another brand of VCR, you can probably also
program your remote to control it. Details are on the next
page.
/jz
VCR1 VCR2
CABLE AUDIO
©0
CHANNEL
D
OK)---
REWIND FF RECORD
JC.<,91) ONe) (_!)\
,,,,'_O_ swap sRslo,
ZOOMo=_OUT (_0
CHAN FRZ
©0
GUIDE
/ VCRI and VCR2 Buttons
/.// • Press to turn on VCR and put
remote in "VCR Mode" so other
buttons will control the VCR.
• Press the TVbutton to put remote
back into "TV Mode".
CHANNEL Buttons
Press to select the next higher or lower
channel in VCR channel memory.
/ DISPLAY Button
,// Press to bring VCR's displays to TV
/ screen.
CLEAR Button
/
/ Used when setting the VCR's
clock and programming its timer.
STOP Button
Press to stop whatever VCR is doing:
Playing, Recording, Rewinding, or
_. Fast Forwarding.
RECORD Button
Press to record.
Notes:
• The six VCR buttons grouped together
(PLAY,PAUSE, STOP, REWIND, FF, and
RECORD) control the VCR even if the
remote is in the "TV Mode".
• The ANT, PROG, CLEAR, and DISPLAY
buttons are for RCA VCR's only.
39