Filter
Top Products
Standard VHS VCR (Not S-VHS)
(These connections allow you to record TV programs and play back tapes.)
Preferred Method 2-Way Signal Splitter** Auo,_
Back of TV
(for
areaswithgoodreception) (suchasRCA#AH047) _(_),_%_
HI-FI OUT SELECT OUT
Oa ,o--'Ca Backo,V°.
CABLIE ANTENNA
CoaxialAntennaCables** /
(such as RCA #AH065G)
**Theseoptionalaccessories s-
(one AH047-2-way splitter, two _oEo
AH065G-antenna cables, and one
AH077G-audio/video cable) are ..Audio/Video Cable**
availableasa kit under#AVH500. ...
_ote: Asecond ........:
._udioMdeo device_h
_ _nnected tothe
:INPUT2 jacksin a
:Similarmanner
Shown here is the preferred method of connecting a VCR to
your TV. This method uses a 2-way signal splitter to run
separate signals to the VCR and TV. This way you can view
either TV programs or VCR tapes and not be concerned about
the position of the VCR's TV/VCR switch. If your cable
company requires a decoder box for premium channels, refer to
page 34.
Note: Whenconnected this way, the audio/videoconnections from the
VCR to the TV are required for picture-in-picture viewing and for you
to watch tapes being played by the VCR.
Operation:
• If the VCR is connected to INPUT 1 jacks as shown, select
channel 91 on the TV to view whatever the VCR is playing.
• If you connect a second audio/video device to INPUT 2, select
channel 92 on the TV to view whatever the second device is
playing.
Note: Youcan program yourTV to automaticallyselect the proper VCR
inputchannel(91or 92) when you press the VCR1or VCR2button.
Detailsare on page 26.
Simplified Method
Incoming
Cable
Back of VCR
Back of TV
NM=I O_ I_I.EC'r OUT
@L@
audio/videodevice ean
be connectedto the
FINPUT2
. jacks in a
slmilarmanner.
Coaxial Antenna Cable"
(such as RCA #AH037)
Shown here is a simplified method of connecting a VCR to your
TV. If your cable company requires a decoder box for premium
channels, refer to page 34.
Note: The audio/video connections from the VCR to the TV are
required for picture-in-picture viewing and for stereo playback from
stereo VCR's.
• Optional accessories are available from most RCA dealers and
electronics supply stores.
Operation:
• If the VCR is connected to INPUT 1 jacks as shown, select
channel 91 on the TV to view whatever the VCR is playing.
• If you connect a second audio/video device to INPUT 2, select
channel 92 on the 'IV to view whatever the second device is
playing.
Note: You can program your TV to automatically select the proper VCR
input _hanne% (9"1 or 92) "when you p.... &e V_:_/_i o_ (,/_?._i_ (_u_,_,,_.
Detailsare on page 26.
37